Jalasanj Adhesive Iran Twin Tube 24 Pack
0 - Comment
%5
21,89 USD
23,04 USD
Category
Stock code
K34 153095221131
The price for 1 package is 24 pieces.
1 Package content
9g glue tube
9g activator tube
stirring stick
Tubes are aluminum,
Gross 23g
Qualifications:
1, Strong adhesion, Suitable for holding different materials together, such as metal, glass, ceramics, wood and much more, except soft plastics,
2, After drying, the volume of the adhesive will not change, As a result, the shape of the assembly will not change,
3, High durability, cures after 10 minutes and reaches its maximum strength after two hours,
4, After drying, it can be filed or cut,
5, Long shelf life,
6, After drying, it has good resistance to water, moisture and weak acids,
Use:
Squeeze equal amounts by weight or volume from tube A and B and mix well for 30 seconds;
After mixing the two parts it turns into a grayish color,
You should never mix two parts on the surface of the materials you want to bond,
1 Package content
9g glue tube
9g activator tube
stirring stick
Tubes are aluminum,
Gross 23g
Qualifications:
1, Strong adhesion, Suitable for holding different materials together, such as metal, glass, ceramics, wood and much more, except soft plastics,
2, After drying, the volume of the adhesive will not change, As a result, the shape of the assembly will not change,
3, High durability, cures after 10 minutes and reaches its maximum strength after two hours,
4, After drying, it can be filed or cut,
5, Long shelf life,
6, After drying, it has good resistance to water, moisture and weak acids,
Use:
Squeeze equal amounts by weight or volume from tube A and B and mix well for 30 seconds;
After mixing the two parts it turns into a grayish color,
You should never mix two parts on the surface of the materials you want to bond,
Make the mixture on a separate surface,
Also, be sure to thoroughly clean the surfaces of the objects to be bonded, and if necessary, it is recommended to use solvents to clean the surfaces.
Be careful not to mix the caps of the tubes.
After mixing two parts of A and B, you have less than five minutes to use it,
If some of the glue leaks out, wait five to eight minutes and then use something sharp to trim the excess glue off your mount to make it look professional.
You should not move the assembly for ten minutes, Although the adhesive continues to harden for 24 hours, you can use your assembly after two hours,
Note that ambient temperature has a big impact on gel time and drying time, The lower the temperature, the longer it takes for the adhesive to gel and dry,
If possible, you can increase the tensile shear strength by drying the adhesive at a temperature of 70 degrees Celsius, The difference will be 4 Newtons per square millimeter,
Once you get used to epoxy adhesives, you will not only use them better, but also solve your adhesive needs more economically.
Also, be sure to thoroughly clean the surfaces of the objects to be bonded, and if necessary, it is recommended to use solvents to clean the surfaces.
Be careful not to mix the caps of the tubes.
After mixing two parts of A and B, you have less than five minutes to use it,
If some of the glue leaks out, wait five to eight minutes and then use something sharp to trim the excess glue off your mount to make it look professional.
You should not move the assembly for ten minutes, Although the adhesive continues to harden for 24 hours, you can use your assembly after two hours,
Note that ambient temperature has a big impact on gel time and drying time, The lower the temperature, the longer it takes for the adhesive to gel and dry,
If possible, you can increase the tensile shear strength by drying the adhesive at a temperature of 70 degrees Celsius, The difference will be 4 Newtons per square millimeter,
Once you get used to epoxy adhesives, you will not only use them better, but also solve your adhesive needs more economically.
Be the first to review this product!